The extraction wall is designed to work with devices with a recommended flow of 4000 m³/h (e.g. CleanAir IMBIBE). The large surface of the wall perfectly fulfils its task, among others for grinding or mechanical cutting. Technical data:
CleanPatron is a device designed for cleaning filter cartridges. The cleaning device works wherever the operation of pulse filters takes place in difficult conditions (when there is a large load of dusty air on 1 m2 of filtering surface). The device is used when the filter cartridges, due to the high dust load, have too low […]
Used in processes such as: grinding thermal and mechanical cutting welding pouring processing of plastics other bothersome industrial processes requiring air purification The device is designed to extract and purify the air from dry, non-sticky, chemically non-aggressive and non-explosive dust. It can be used to protect several workplaces (workplace ventilation). The main filtering elements are […]
Electromagnetic diaphragm valves are used to control the flow of the working medium, working in two positions: fully open or fully closed. It can be used as an actuator that operates on the basis of the current signal received from the controller. The controller can be, for example, a timer or an ordinary manual switch.
Powder that absorbs moisture and grease impurities in the exhausted air from workstations. Used for spraying on the filtering surface of cartridges; it improves their operation and extends their life. Precoat is available in 125-liter bags. ASP equipment or modules are used for powder dosing.
Produced in different classes and sizes, available in sheets and rolls. They have different material properties depending on the type of contamination and working environment. The mats can be synthetic, glass or impregnated with active carbon.
Used to reduce the sound pressure generated during operation of ventilation devices. Silencers are selected individually.
Used in CleanPatron devices as an accessory to mount the cleaned filter cartridges.
Used for direct switching on and off of fan motors. They have short-circuit and overload protection.
This ventilation extraction duct is an element of the filtration installation of the extraction system. Designed for the extraction of air pollutants (small fractions, dusts and gases), which are generated in various industrial processes, it is an element with a circular cross-section; length: 3m. The duct has three extraction grilles with throttles, on the side […]